High Gloss Armor Clear is the strongest oven cured clear coat on the market. It is a two-component, oven-cure system that is ideal for applications where cure time is critical. High Gloss Armor Clear leads the industry in hardness, chemical resistance and wear performance. As a high gloss, oven cured, ceramic clear coating, it can be used as a top coat over several materials such as metals, composites, plastics, hydrographics, PVD and more. Click here to be sure you're using the best Cerakote Clear for your project.
*NOTE: This product comes with H-100 catalyst and requires a 325 Mesh Strainer (SE-277). Do not store this product in sunlight.
Cerakote H Series coatings are durable, corrosion-resistant, and provide unparalleled levels of hardness and adhesion. These coatings are also resistant to most solvents and chemicals. The foundation for Cerakote H Series coatings is a unique ceramic technology that imparts both flexibility and excellent wear resistance to the final coating. Check out the Resources section for product application guides, technical data sheets and MSDS information.
| Starting quantity | Price per item | Savings |
|---|---|---|
| 1 item | US$ 35.00 | — |
US$ 35.00 / per item
Starting quantity: 1 item
Total for 1 item: $35.00
Estimated lead time: 0 days days
US$ 35.00
per itemH-300
HIGH GLOSS ARMOR CLEAR
US$ 35.00
/ itemHIGH GLOSS ARMOR CLEAR
SKU: H-300
| Specification | Value |
|---|---|
| Recommended Cure Schedule | Ambient Flash 15 minutes, Oven Cure 2 Hours @ 250°F |
| Recommended Mil Thickness (mil) | .25 |
| Strainer Size (mesh) | 325 (Part # SE-277) |
| Gloss Level / Units(GU) | High Gloss / 176 |
| Density (g/mL) | 1.26 |
| % Solids (±2%) | 25 |
| Viscosity (cP) | 8 |
| Theoretical Coverage per gal @ Recommended Mil Thickness (ft²) | 1593 |
| Coating Stability (°F) Max. Temp. | 500+ |
| Color Stability (°F) Max. Temp. | 300 |
| Chemical Resistance | Excellent |
| UV Stability | Fair |
| Corrosion Resistance (Hrs) ASTM B117 | 2000+ |
| Pencil Hardness Gouge ASTM D3363 | 6H |
| Pencil Hardness Scratch ASTM D3363 | 7H |
| Crosscut Adhesion ASTM D3359 | 5B |
| Flexibility (% Resistance) Conical Mandrel Bend ASTM D522 | 100 |
| Impact Performance Direct/Indirect (in-lbs.) ASTM D2794 | 160/160 |
| Cure Schedule | Ambient Flash 15 Minutes, Oven Cure 2 Hours @ 250°F |
| Recommended Thickness (mil) | 1 |
| Strainer Size (mesh) | 150 (Part # SE-276) |
| Crosscut Adhesion ASTM D3359 | 5B |
| Flexibility (% Resistance) Conical Mandrel Bend ASTM D522 | 100 |
| Impact Performance Direct/Indirect (in-lbs.) ASTM D2794 | 160/160 |
Safety Data Sheet
Application Guide
See more projects using HIGH GLOSS ARMOR CLEAR H-300 in our gallery.
HIGH GLOSS ARMOR CLEAR
H-300
:1
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
Admin
—
What do you use to thin Cerakote?
Answer from Admin
We don't recommend adding or removing anything from our coatings in hopes of adjusting the viscosity if it's too thick or thin. Doing so may jeopardize the performance and longevity of what we know our products are capable of. There are ways to mitigate coating from reaching a point of unusable status. The articles below provide information on Cerakote® shelf-life, storage and agitation to assist with longevity.
What is the Shelf-Life of Cerakote?
Warren Donald
—
What is the shelf life of the FX series after being mixed with the H-300 or H-301 clear?
Answer from josh benton
As long as the H-300/H-301 Cerakote Clear is not catalyzed, Cerakote FX and Clear will remain good for 12 months from the ship date of the clear.
Admin
—
How should I etch Fiber Glass?
Answer from josh benton
There are two options to etch Carbon Fiber, Fiber Glass, Plastic, Polymers, and soft substrates.
1) Lightly sandblast with #100 grit Aluminum Oxide or Garnet Sand (between 30-40PSI) to give the surface a blasted profile.
2) Use a Red Scotch Brite pad to provide a suitable etch.
Page 1 of 6
