Pricing
You may also like
Explore these related Cerakote products that complement your selection.
Shop All Cerakote Coatings Cerakote Micro Slick Dry Film Lubricant Coating is an ambient (air) cure coating that is blue/grey in appearance.
Cerakote Micro Slick is used to assist with friction areas and shedding of oil. It is used to reduce friction on a variety of internal engine components such as piston skirts, valve stems, and the underside of valve covers. It is also used on firearm components, such as bolts, and bolt carriers.
*NOTE: This product does not require catalyst. This color does require a 325 Mesh Strainer (SE-277).
NOTE: This coating is PFAS free.
Cerakote Micro Slick Dry Film C Series Ceramic Coatings will perform at temperatures up to 1200°F and set the industry standard in high temperature coatings. C Series coatings are a line of air cured, ready to spray ceramic coatings. Check out the Resources section for product application guides, technical data sheets and SDS information.
MICRO SLICK DRY FILM LUBRICANT COATING (AIR CURE)
SKU: C-110
| Specification | Value |
|---|---|
| Cure Schedule | Air Cure: Tack Free 45 - 60 minutes, Full Cure 5 days |
| Recommended Thickness (mil) | 0.25 |
| Strainer Size (mesh) | 325 (Part # SE-277) |
| Gloss Level / Units (GU) | Flat / 6 |
| Density (g/mL) | 1.36 |
| % Solids (±2%) | 23 |
| Viscosity (cP) | 9 |
| Theoretical Coverage per gal @ Recommended Mil Thickness (ft²) | 1460 |
| Corrosion Resistance (hrs) ASTM B117 | Limited Corrosion Resistance |
| Coating Stability (°F) Max. Temp. | 1800°F |
| Color Stability (°F) Max. Temp. | 500°F |
| Chemical Resistance | Excellent |
| UV Stability | Excellent |
| Pencil Hardness Gouge ASTM D3363 | 9H |
| Pencil Hardness Scratch ASTM D3363 | 9H |
| Crosscut Adhesion ASTM D3359 | 5B |
| Flexibility (% Resistance) Conical Mandrel Bend ASTM D522 | 99 |
| Impact Performance Direct/Indirect (in-lbs.) ASTM D2794 | 60/60 |
Application Guide
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
Admin
—
What do you use to thin Cerakote?
Answer from Admin
We don't recommend adding or removing anything from our coatings in hopes of adjusting the viscosity if it's too thick or thin. Doing so may jeopardize the performance and longevity of what we know our products are capable of. There are ways to mitigate coating from reaching a point of unusable status. The articles below provide information on Cerakote® shelf-life, storage and agitation to assist with longevity.
What is the Shelf-Life of Cerakote?
Dirk Phillips
—
How much time is required for c series to “flash“ before tape or stencils can be used to apply multiple colors?
Answer from Admin
The recommended tack free time for C-series is 45 minutes to one hour, at this time you can then apply your stencils.
Admin
—
How should I etch Fiber Glass?
Answer from josh benton
There are two options to etch Carbon Fiber, Fiber Glass, Plastic, Polymers, and soft substrates.
1) Lightly sandblast with #100 grit Aluminum Oxide or Garnet Sand (between 30-40PSI) to give the surface a blasted profile.
2) Use a Red Scotch Brite pad to provide a suitable etch.
Page 1 of 5
See more projects using MICRO SLICK DRY FILM LUBRICANT COATING (AIR CURE) C-110 in our gallery.
| Starting quantity | Price per item | Savings |
|---|---|---|
| 1 item | US$ 35.00 | — |
US$ 35.00 / per item
Starting quantity: 1 item
Total for 1 item: $35.00
Estimated lead time: 0 days days
US$ 35.00
per itemC-110
MICRO SLICK DRY FILM LUBRICANT COATING (AIR CURE)
US$ 35.00
/ item
