Pricing
You may also like
Explore these related Cerakote products that complement your selection.
Shop All Cerakote Coatings Cerakote Graphite Black is a flat black.
*NOTE: This product does not require catalyst. This color does require a 150 Mesh Strainer (SE-276).
You can find the Cerakote Mixing Calculator Cerakote Mixing Calculator.
Cerakote Graphite Black C Series Ceramic Coatings will perform at temperatures up to 1,800°F and set the industry standard in high temperature coatings. C Series coatings are a line of air cured, ready to spray ceramic coatings. Check out the Resources section for product application guides, technical data sheets and SDS information.
GRAPHITE BLACK
SKU: C-102
| Specification | Value |
|---|---|
| Cure Schedule | Air Cure: Tack Free 45 - 60 minutes, Full Cure 5 Days |
| Recommended Thickness (mil) | 1 |
| Strainer Size (mesh) | 150 (Part # SE-276) |
| Gloss Level / Units (GU) | Flat / 3 |
| Density (g/mL) | 1.46 |
| % Solids (±2 %) | 56 |
| Viscosity (cP) | 64 |
| Theoretical Coverage per gal @ Recommended Mil Thickness (ft²) | 904 |
| Corrosion Resistance ASTM B117 | Limited Corrosion Resistance |
| Coating Stability (°F) Max. Temp. | 1800°F |
| Color Stability (°F) Max Temp. | 1500°F |
| Chemical Resistance | Excellent |
| UV Stability | Excellent |
| Pencil Hardness Gouge ASTM D3363 | 7H |
| Pencil Hardness Scratch ASTM D3363 | 7H |
| Crosscut Adhesion ASTM D3359 | 4B |
| Flexibility (% Resistance) Conical Mandrel Bend) ASTM D522 | 98 |
| Impact Performance Direct/Indirect (in-lbs.) ASTM D2794 | 60/40 |
No resources available.
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
Admin
—
What do you use to thin Cerakote?
Answer from Admin
We don't recommend adding or removing anything from our coatings in hopes of adjusting the viscosity if it's too thick or thin. Doing so may jeopardize the performance and longevity of what we know our products are capable of. There are ways to mitigate coating from reaching a point of unusable status. The articles below provide information on Cerakote® shelf-life, storage and agitation to assist with longevity.
What is the Shelf-Life of Cerakote?
Admin
—
With C-102, a flash time between coats is not necessary. You should apply each coat back-to-back until you reach the recommended film thickness. If your initial coat is applied too heavy, you will want to wait just long enough to see the solvents evaporate before applying an additional coat, which usually takes three to five minutes in ideal conditions (Room temperature between 68°F – 74°F, with 20% to 50% humidity).
Jamie Thornberry
—
What is the recommended flash time between coat's with C-102 Graphite Black?
Answer from Admin
With C-102, a flash time between coats is not necessary. You should apply each coat back-to-back until you reach the recommended film thickness. If your initial coat is applied too heavy, you will want to wait just long enough to see the solvents evaporate before applying an additional coat, which usually takes three to five minutes in ideal conditions (Room temperature between 68°F – 74°F, with 20% to 50% humidity).
Page 1 of 5
See more projects using Graphite Black C-102 in our gallery.
| Starting quantity | Price per item | Savings |
|---|---|---|
| 1 item | US$ 35.00 | — |
US$ 35.00 / per item
Starting quantity: 1 item
Total for 1 item: $35.00
Estimated lead time: 0 days days
US$ 35.00
per itemC-102
GRAPHITE BLACK
US$ 35.00
/ item
